Edged glued panel catalog
Material: pine, linden
A/A, A/B, B/B grade 100 % FSC
Thickness: 18 mm up to 45 mm
Length: from 1000 mm up to 5000 mm
Width: 300 mm up to 900 mm
A/A, A/B, B/B grade 100 % FSC
Thickness: 18 mm up to 45 mm
Length: from 1000 mm up to 5000 mm
Width: 300 mm up to 900 mm
Our company manufactures different dimensions panels and Finger jointed, mixed grain lamellas. Allowed lamellas up to 45 мм. Lamellas are selected by texture.
All panels are glued in according with EN 204 using PVAC (formaldehyde free, white) glue, class D3.
Moisture content: 8-10%
Solid wood panels from our factory are qualified into categories A, B (depending on the number of knots and some other defects).
All panels are glued in according with EN 204 using PVAC (formaldehyde free, white) glue, class D3.
Moisture content: 8-10%
Solid wood panels from our factory are qualified into categories A, B (depending on the number of knots and some other defects).
«А» — without defects (small mineral deposits are allowed)
Grade "B" are allowed:
- light knots with a max diameter 10 mm without restrictions in quantity;
- heartwood is allowed with an amount not more than 20% of a panel's square;
- mineral deposits – without restrictions in size and quantity;
- light knots with a max diameter 10 mm without restrictions in quantity;
- heartwood is allowed with an amount not more than 20% of a panel's square;
- mineral deposits – without restrictions in size and quantity;
Linden edged glued panel
A/A, A/B, B/B grade 100 % FSC
Thickness: 18 mm up to 45 mm
Length: from 1000 mm up to 5000 mm
Width: 300 mm up to 900 mm
Thickness: 18 mm up to 45 mm
Length: from 1000 mm up to 5000 mm
Width: 300 mm up to 900 mm
PACKING AND LOADING
Each piece wrapping into a PET film or/and just a full pack wrapping are possible.
In transport bags with boards of the same size and grade, tightened by PET tape with packing bars, cardboard, plastic corners or wooden gaskets are installed under the tape to avoid damage to the shield.
Truck loading is carried out by a folk lift. We always use plastic angles under the fixing belts during the loading a truck.
- 25 years manufacturing experience
- The largest wood drying chamber in Ukraine
- Using modern technologies for best quality production
- Supplying wood over 10 countries in Europe
- Best quality for reasonable price
Wood Manufacturer
Ukraine
Get your compressional offer Leave your contacts detail and we will call you later By clicking submit you are agreeing to the Terms and Conditions. |
Contact us:
+ 380 63 4270702
export@nashles.com.ua
export@nashles.com.ua
17/1 Surikova st., Cherkasy, Ukraine, 18028
